Blue And White Ram Slots

7/31/2022by admin

And I got RAM question, shall I put the memory sticks in SLOT 1/3 or stay with my current setup 2/4? Intel Core i7-4790 3.6g 1150 Asus Maximus VII Hero Z97 DDR3 1600 CORSAIR VENGEANCE LP 16GB (2X8) 240PIN DDR3 1600 SAPPHIRE RADEAON R9 380 NITRO 4GB DDR5 CRUCIAL BX100 250GB SATA3 SEASONIC 860W PLATINUM ACTIVE PFC:). Gigabyte Blue And White Ram Slots, slotter casino no deposit codes, blackjack ontario, close-by casinos to play 21 free. A2A How can you fix a RAM slot on a PC motherboard that doesn’t recognize RAM sticks? Assuming the other slots recognize RAM ok, and assuming the RAM that you are trying to insert in the bad RAM slot works fine in other slots, then the problem is.

carlos_9

New Member

Hi and thank you.
I builded 1 year my own PC, Specs:
CPU: Intel® Core™ i7-4790K ~4.0Ghz
RAM: Crucial Ballistix Sport 8GB (2 x 4GB) 1600Mhz
PSU: Thermaltake SMART M Series SP-850M 850W
MOBO: MSI Z97 PC MATE
WC: CORSAIR H80i
Since 6 months ago i was having a trouble: Sometimes when i was turning it on, it turned on and off repeatedly, the solution was: Remove the CMOS battery. 1 week ago a decide to clean it up, then i put everything back, and when i turned on, i got the problem, but this time removing the CMOS battery didn't work, i bought 12GB ram (1x8gb, 1x4GB Crucial Ballistix Sport @1600ghz), and helped me to understand what going on: Channel B (3 and 4 slots, counting from left to right) wasn't working right.
RAM in slot 1 only = boot
RAM in slot 2 only = boot
RAM in slot 3 only = turned on and off repeatedly
RAM in slot 4 only = turned on and off repeatedly
RAM in slot 1&2 only = boot
RAM in slot 1&3 only = turned on and off repeatedly
RAM in slot 1&4 only = turned on and off repeatedly
RAM in slot 2&3 only = turned on and off repeatedly
RAM in slot 2&4 only = turned on and off repeatedly
RAM in slot 3&4 only = turned on and off repeatedly
RAM in slot 1,2,3, and 4 = Boot (No display, keyboard and mouse were not lighting)
I tried:
Update to latest BIOS version
Clean slots with Contact cleaner (DeoxIT D5)
I don't know how to check voltage, etc.
Thank you so much

carlos_9

New Member